I use a dynamic DNS service to remotely access various stuff at home ... till now I maintain the IP updated using No-IP DUC program that consumes up to 7MB of memory when not minimized and 1 MB minimized ... since I run VCon an old PC (2.5GB ram), ram is an issue for me ...

so here is a command that do the trick so no extra programs to run, no extra icon in the tray and most save some valuable ram.
as well, with a bit of modification, you can make VC email or skype message ..etc. latest IP and drop the DynDNS completely

it starts with VC and check every 5 minutes (you can revise the delay in the first command)

(Bug fixed 2015'01'25)


<?xml version="1.0" encoding="utf-16"?>
<!--VoxCommando 2.1.3.6-->
<command id="337" name="Dynamic DNS No-IP" enabled="true" alwaysOn="False" confirm="False" requiredConfidence="0" loop="False" loopDelay="0" loopMax="0" description="">
  <action>
    <cmdType>VC.SetEventTimer</cmdType>
    <params>
      <param>300</param>
      <param>Network.UpdateNO-IP</param>
    </params>
    <cmdRepeat>1</cmdRepeat>
  </action>
  <action>
    <cmdType>Scrape</cmdType>
    <params>
      <param>http://myexternalip.com/raw</param>
    </params>
    <cmdRepeat>1</cmdRepeat>
  </action>
  <action>
    <cmdType>Results.RegEx</cmdType>
    <params>
      <param>(\d+).(\d+).(\d+).(\d+)</param>
      <param>.</param>
      <param>{LastResult}</param>
      <param>clean up IP</param>
    </params>
    <cmdRepeat>1</cmdRepeat>
  </action>
  <if ifBlockDisabled="False" ifNot="False">
    <ifType>(A)==(B)</ifType>
    <ifParams>{Match.1}&amp;&amp;{M:Variables.CurrentIP}</ifParams>
    <then>
      <action>
        <cmdType>VcAdvanced.Log</cmdType>
        <params>
          <param>No-IP: no change in IP ({LastResult})</param>
        </params>
        <cmdRepeat>1</cmdRepeat>
      </action>
      <action>
        <cmdType>VC.StopMacro</cmdType>
        <params />
        <cmdRepeat>1</cmdRepeat>
      </action>
    </then>
    <else>
      <action>
        <cmdType>Scrape</cmdType>
        <params>
          <param>http://dynupdate.no-ip.com/nic/update?hostname={M:Credentials.No-IPHost}&amp;myip{LastResult}</param>
          <param>{M:Credentials.StID}</param>
          <param>{M:Credentials.StPassword}</param>
        </params>
        <cmdRepeat>1</cmdRepeat>
      </action>
    </else>
  </if>
  <if ifBlockDisabled="False" ifNot="False">
    <ifType>(A)Contains(B)</ifType>
    <ifParams>{LastResult}&amp;&amp;good</ifParams>
    <then>
      <action>
        <cmdType>VcAdvanced.Log</cmdType>
        <params>
          <param>No-IP:  Success, IP updated to: {LastResult} old IP: {M:Variables.CurrentIP}</param>
        </params>
        <cmdRepeat>1</cmdRepeat>
      </action>
      <action>
        <cmdType>Results.Replace</cmdType>
        <params>
          <param>good </param>
        </params>
        <cmdRepeat>1</cmdRepeat>
      </action>
      <action>
        <cmdType>Map.Set</cmdType>
        <params>
          <param>Variables</param>
          <param>CurrentIP</param>
          <param>{LastResult}</param>
          <param>True</param>
        </params>
        <cmdRepeat>1</cmdRepeat>
      </action>
    </then>
    <else>
      <action>
        <cmdType>VcAdvanced.Log</cmdType>
        <params>
          <param>No-IP:  failed: {LastResult}</param>
        </params>
        <cmdRepeat>1</cmdRepeat>
      </action>
    </else>
  </if>
  <event>Network.UpdateNO-IP</event>
  <event>VC.Loaded</event>
</command>


Thanks for the command.  Should come in handy for some and prove educational for others.

You are probably already aware but the majority of modern routers come with this capability built-in.

Quote from: jitterjames on January 20, 2015, 04:09:51 PM
You are probably already aware but the majority of modern routers come with this capability built-in.

Yep but not all of them support all providers