hey guys I know this is a long shot. I believe that my RF (433Mhz) receiver has gone bad, and I have some new codes that I need to learn for some RGB led strip lights using RF.

I thought at first that I got a remote/controller that isn't using 433Mhz, however when I test a remote that I already learned the codes from, it doesn't detect any RF signals. Occasionally it will show phantom codes, but nothing in the right range to the original RF codes from my projector screen remote

Example:
projector screen remote (good code)
1103,104,36ABABBABAABB90,124BAB25ABAABABBAABBAABBAAB45CBABABAABF

phantom codes (bad code)
153,60,11B36,56B18,13B16G32,30,24,21BGBBBGKG51BHKCBBG

If the RF Receiver (433Mhz) has gone bad, will either of these work for the replacement?

Amazon 433MHz Superheterodyne

Ebay 433MHz Superheterodyne


Thank you

No Problem, I hope your move is going well.


looks like I had some issues with certifying SSL and TSL connections while using all scrape actions. took a few changes in my registry to get it sorted out. but had nothing to do with VC, seems like an issues with a windows update pushed a little while back, I just never noticed as I don't use VC on my laptop, I just use it to build commands.

Thanks for checking though.

Sorry.  I'm in the middle of moving to a new house in a new province and have been completely focused on that.  Did not notice your post.

Is everything sorted out now?

Did some more testing and decided to test it on my HTPC, and low and be hold it works on that pc.


So it looks like the error I'm Getting is local to my Laptop so I'll have to doo some more digging on that.

UPDATE: I was able to resolve the could no create ssl/tsl secure channel error, 

I'm trying to intergrate ToDoist with VC, I've created an action to get my project names and add them to a map table. but I'm having problems with the scrape.post actions, I'm getting this error could no create ssl/tsl secure channel when I try to run the actions.

Todoist API

I can send you my current APIkey with a PM so you don't have to create an account.

or if you create an account, you can get the API key from Todoist.com > settings > integrations > Api token (bottom of the page).

<?xml version="1.0" encoding="utf-16"?>
<!--VoxCommando 2.3.0.3-->
<commandGroup open="True" name="ToDoist" enabled="True" prefix="" priority="0" requiredProcess="" description="">
  <command id="801" name="ToDoist - Get project names" enabled="true" alwaysOn="False" confirm="False" requiredConfidence="0" loop="False" loopDelay="0" loopMax="0" description="">
    <action>
      <cmdType>Scrape.Get</cmdType>
      <params>
        <param>https://api.todoist.com/rest/v2/projects</param>
        <param />
        <param />
        <param />
        <param />
        <param>Authorization: Bearer {M:apiKeys.ToDoist}</param>
      </params>
      <cmdRepeat>1</cmdRepeat>
    </action>
    <if ifBlockDisabled="False" ifNot="False">
      <ifType>LastActionSuccess</ifType>
      <ifParams>&amp;&amp;</ifParams>
      <then>
        <action>
          <cmdType>Results.RegExSingle</cmdType>
          <params>
            <param>"id":\s"(.\d+)".*?"name":\s"(.*?)",</param>
          </params>
          <cmdRepeat>1</cmdRepeat>
        </action>
        <action>
          <cmdType>Map.Set</cmdType>
          <params>
            <param>ToDoist</param>
            <param>{Match.{i}.2}</param>
            <param>{Match.{i}.1}</param>
          </params>
          <cmdRepeat>{#M}</cmdRepeat>
        </action>
      </then>
      <else />
    </if>
  </command>
  <command id="802" name="ToDoist - Add project" enabled="true" alwaysOn="False" confirm="False" requiredConfidence="0" loop="False" loopDelay="0" loopMax="0" description="">
    <action>
      <cmdType>Scrape.Post</cmdType>
      <params>
        <param>https://api.todoist.com/rest/v2/projects</param>
        <param>{"name": "ShoppingList"}</param>
        <param />
        <param />
        <param>application/json</param>
        <param>X-Request-Id: $(uuidgen)</param>
        <param>Authorization: Bearer {M:apiKeys.ToDoist}</param>
      </params>
      <cmdRepeat>1</cmdRepeat>
    </action>
  </command>
  <command id="897" name="ToDoist - Add Task" enabled="true" alwaysOn="False" confirm="False" requiredConfidence="0" loop="False" loopDelay="0" loopMax="0" description="">
    <action>
      <cmdType>Scrape.Post</cmdType>
      <params>
        <param>https://api.todoist.com/rest/v2/tasks</param>
        <param>'{"content": "Cover pool", "project_id": "{M:ToDoist.Pool}"}'</param>
        <param />
        <param />
        <param>"Content-Type: application/json"</param>
        <param>X-Request-Id: $(uuidgen)</param>
        <param>Authorization: Bearer {M:apiKeys.ToDoist}</param>
      </params>
      <cmdRepeat>1</cmdRepeat>
    </action>
  </command>
</commandGroup>

hopefully it's something I'm doing wrong this could be used to replace ourgroceries and add a way to integrate mobile reminders with VC

thanks for any help

We use voxcommando daily in our home for home automation and media control. It's a great middle man for non voice actions as well. And it makes movie nights amazing, and hopefully next summer it will also be able to update me on my pool temperature.

I'll be setting up home assistant soon and using that with VC

VC is truly an overlooked software

Hi guys,


I'm also still using VoxCommando.

It's a permanent fixture in my smarthome. I rarely use the voice input, but it is unbeatable for saving or forwarding status data and I can't imagine my home without it.
I have a mix of Z-wave / Zigbee / RF433 and infrared - VoxCommando is the only program that brings these devices together.


Kalle

Thank you very much Jonathan.  I'm really happy to hear that.

We use VC a bit less than we used to but it is still very much in action in our home too!

I do miss the once active community on this forum but such is life!

Developer James,
        You should be quite proud of yourself for having brought the world this wonderful application! While so much in
this hobby {I know for some it's not just a hobby} changes over and over, VoxCommando  has remained relevant and
entertaining year after year!

Well Done sir! and Thank You!

Jonathan Peyton

I have tested the aws code from James and also with this I get on the echo only an "OK" as confirmation, see attached image.
Maybe the problem is with the webserver or the settings.


The command is executed correctly, so it's not really a problem, it was always just nice to hear what "Alexa" had understood.
The voice output via VoxCommando works perfectly - who knows what was changed by Amazon in the past, considering how long the skill has existed.


Whether "Alexa" meanwhile releases the device variable, I can not tell you unfortunately.


Kalle